Phần mềm dự toán AZHOME GROUP cho công trình và báo giá xây dựng nhà trọn gói, khách hàng có thể tra cứu ngay tại đây:
11/07/2025
Industrial Factory Construction
The factory is the place where business products are directly produced and where many workers and employees work. It can be seen how important the factory is to the business, so the construction of the factory is carried out very strictly at each step.
To complete the factory in accordance with the requirements and wishes of the investor, it is necessary to have a detailed and specific plan. Especially in the design stage, it is necessary to clearly show from the details of raw materials, technical information parameters to structural details for the factory.
1. Factory construction steps:
1.1 Foundation construction:
+ Ground leveling: The contractor must consider the ground condition to carry out leveling in accordance with the drawing.
+ Locating the axis center: This is an important step to help determine the position of the column foundations on the drawing board.
+ Digging the fence foundation: The fence surrounding the factory should be long, high and must be sturdy.
+ Foundation construction: After having the axis center, the foundation construction will begin, the material is reinforced concrete.
+ Compacting soil and rock for the factory: After leveling, the ground will be compacted to the correct density required by the design.
+ Factory floor construction: Perform steel pinning, concrete pouring and must follow the correct procedure to avoid cracking the concrete floor.
1.2. Steel frame construction:
+ Steel frame erection: Lift and place steel structure components in certain positions.
+ Installation of purlins and bracing cables: When installing, ensure stability outside the frame plane.
+ Construction of enclosure: Building enclosure walls and constructing corrugated iron roofs.
1.3. Infrastructure construction : Installing drainage pipes, rolling roadbeds, rolling roadbed stones, maintaining roadbed concrete, cutting anti-crack grout, etc.
1.4. Construction of technical systems: Including fire prevention and fighting systems, communication systems, electrical systems, technical systems serving production, etc.
1.5. Completion: Including steps of marking traffic lanes, installing plaster ceilings in office buildings, planting grass to create green space outside the factory, planting trees and flowers in the factory, feng shui landscape (if any)
1.6. Cleaning and putting into use: Cleaning the factory, canteen and installing machinery and equipment.
To better understand the details of each step of factory and pre-engineered steel building construction, you can read the article here .
2. A good factory needs to meet the following standards:
1. Factory location
2. Design standards
3. Factory structure
4. Factory water supply and drainage system
For details on each standard for building a good and quality factory, you can refer here.
3. Some notes when building a factory
3.1. Factory foundation
– Foundation is the most important and essential structure of any construction project and factories are no exception.
– When designing this section, the architect needs to pay special attention to presenting the technical parameters in the most complete and detailed manner.
– Materials and details used to make the foundation must meet all established standards and regulations, ensuring sufficient conditions for project implementation and construction.
– When choosing the location for the foundation, each different ground will have different treatments.
– If the factory is built on weak ground or mud, it is necessary to reinforce the foundation by using pile driving solutions, bored piles, etc.
– If the factory is built on hard ground, the foundation can be built as usual without needing additional foundation reinforcement such as pile driving or cajuput pile driving.
– See more about foundation construction here
3.2. Factory floor
– Depending on the function of use, the design unit and the factory construction unit have the most reasonable implementation methods.
– In addition, the thickness of the concrete layer also needs to be focused on. Depending on the nature of production, business activities, use of large or small tonnage machinery, the thickness of the concrete layer is changed accordingly, the concrete thickness ranges from 10, 20, 30 or 50cm.
– After the concrete part of the factory is completed, to increase its durability, smooth the floor and apply an epoxy layer to prevent dust and make it easy to clean.
3.3. Factory structure
During the process of building a factory, you and the architect as well as the contractor need to discuss regularly to propose the appropriate number of columns, trusses, beams, and purlins for the factory, avoiding the case of missing one of the above factors affecting the quality of the project or causing waste.
3.4. Choosing a quality design and construction general contractor
Another factor that determines the quality of a factory is the construction workforce. The skills of the construction teams require professionalism and deep understanding of the field. Only then will the project ensure the best quality.
FACTORY CONSTRUCTION ACCORDING TO INTERNATIONAL STANDARDS:
Reasons why you should choose AZHOME GROUP:
1. Providing solutions for designing and building beautiful, high-quality factories.
2. The most optimal factory construction price.
3. Accurate estimate of factory construction cost.
4. Fast project completion time.
5. Consulting support – meeting and exchange is completely free.
AZHOME GROUP is a company specializing in the design and construction of factories, pre-engineered steel buildings, high-quality industrial warehouses. In addition, AZHOME GROUP also designs and constructs office buildings, participates in surveys, inspections, etc.
AZHOME GROUP has participated in many construction projects across the country. We have a lot of experience in constructing large-scale projects of famous investors from countries around the world such as: Japan, Korea, Taiwan, America (USA), Singapore, ….
AZHOME GROUP ‘s reputation is increasingly strengthened as we are better known through compliments about our professional, serious working attitude, open-mindedness and honesty in business.
AZHOME GROUP is now a trusted brand for big-name investors in the Vietnamese market.
Your benefits:
We have been implementing large-scale factory projects from 70,000 square meters to more than 200,000 square meters of foreign enterprises investing in Vietnam such as: Korean, Japan, Taiwan, … We are increasingly striving to become one of the leading brands in terms of prestige and project implementation capacity in Vietnam, reaching out to markets in countries in the Southeast Asian region and the World.
AZHOME GROUP is committed to providing customers with the best factory construction services. With the enthusiasm and continuous efforts of all staff. In particular, we have conquered many large projects and gained the trust and satisfaction of the “Big Guys” in the world who came to Vietnam to invest in projects.
AZHOME GROUP is very pleased to serve you with the spirit: “COOPERATION FOR DEVELOPMENT”
Popular prefabricated factory construction models today:
VINACON FACTORY CONSTRUCTION PROJECTS THAT HAVE BEEN AND ARE BEING IMPLEMENTED
AZHOME GROUP is implementing the construction of industrial factories.
AZHOME GROUP is implementing the construction of industrial factories.
AZHOME GROUP is implementing the construction of industrial factories.
AZHOME GROUP VIETNAM CONSTRUCTION INVESTMENT JOINT STOCK COMPANY
Hanoi Branch : No. 17 To Huu – C37 Ministry of Public Security – To Huu – Nam Tu Liem
☎️ Hotline: 0904.87.33.88
HCN Branch : 44 Nguyen Anh Thu – Tan Chanh Hiep Ward – District 12
☎️ Hotline: 0912.07.64.66
Da Nang Branch: 68 Ton Duc Thang Street – Hoa Khanh Ward – Lien Chieu District
☎️ Hotline: 0902.038.666
Mail: tapdoanazhome@gmail.com
Website: https://azhomegroup.vn/
CÁC TIN KHÁC
Nhà máy sản xuất dụng cụ thể dục thể thao Công ty Daiwa
Ngày 15 Tháng 12 Năm 2020
Dự án: ĐÀ NẴNG – Nhà máy sản xuất dụng cụ thể dục thể thao Công ty Daiwa Địa chỉ: Đường số 6 – 7 KCN Hòa...
Mẫu nhà biệt thự vườn 1 tầng đẹp trên diện tích 10x14m
Ngày 25 Tháng 07 Năm 2020
Kiến trúc mái thái vẫn được khá nhiều gia chủ lựa chọn để xây dựng nên công trình hiện đại và ấn tượng. Đối với...
Giới thiệu AZHome
Ngày 10 Tháng 04 Năm 2017
TỔNG THẦU XÂY DỰNG NHÀ XƯỞNG ĐẠT TIÊU CHUẨN CHẤT LƯỢNG AZHOME GROUP là tổng thầu xây dựng nhà xưởng, nhà công nghiệp, chuyên thực hiện các công...
Thiết kế Trường Mầm Non Trường An
Ngày 12 Tháng 09 Năm 2018
Dự án: Trường Phổ thông Trung học Vinschool 1. Chủ đầu tư: Công ty CP Phát triển đô thị Hà Nội 2. Địa điểm xây...
Tuyển Nhân Viên Kinh Doanh – Sale Nội Thất
Ngày 23 Tháng 06 Năm 2021
MÔ TẢ CÔNG VIỆC – Tìm kiếm khách hàng có nhu cầu thiết kế thi công nội thất các dự án : văn phòng, nhà...
Dự án kiến trúc
